Connecting A Personal Computer - Omron C200H-MC221 Operation Manual

Connecting a Personal Computer

3-1 Connecting a Personal Computer
3-1-1 Personal Computer and MC Unit
RS-422
24
This section explains how to connect a personal computer with MC Support
Software to the PC.
The MC Unit and personal computer can be connected via the following.
• RS-422
• RS-232C
Prepare an RS-232C cable before connecting the MC Unit and personal com-
puter via RS-232C.
The following are the communications conditions of the MC Unit and personal
computer via RS-422 or RS-232C.
Communications rate:
Parity:
Data length:
Stop bits:
Response monitor time: 10 s
The following connections are possible.
Set the slide switch to HOST.
20-pin half-pitch
connector
9,600 bps
None
8 bits
2 bits
25-pin D-sub
connector
25-pin D-sub
connector (female)
CV500-CIF01
(OMRON) Connect as
shown
below.
Section 3-1
IBM PC/AT or
compatible
Connector for the
personal computer