System Setting On Personal Computer (Client); Setting The Tcp/Ip Protocol - Omron YRC User Manual

3.5

System setting on personal computer (client)

The following describes the basic setting procedure by using Windows7 as an example. For details about other
OS or device, refer to the relevant manual.
For details about setting procedure, refer to the first step guide supplied with Windows7.
Additionally, the set values, such as IP address, need to be changed appropriately according to the customer's
network environment.
* Windows7 is a registered trade mark of Microsoft in the United States.
3.5.1

Setting the TCP/IP protocol

Step 1
Open the "Control Panel" window.
Step 2
Click the [Network and Sharing
Center] icon in the "Control Panel"
window.
Step 3
Click [Change adapter settings] in
the "Network and Sharing Center"
window.
Step 4
Right-click the [Local Area
Connection] icon to open the
"Local Area Connection Properties"
window.
Step 5
Confirm that [Client for Microsoft
Networks] and [Internet Protocol
Version 4 (TCP/IPv4)] are shown in
the "Networking" tab window.
Step 6
Check on [Internet Protocol Version 4
(TCP/IPv4)] and click the [Properties]
button.
Step 7
According to the operating
conditions, input the IP address,
subnet mask, and gateway on
the personal computer side in the
"Internet Protocol Version 4 (TCP/
IPv4) Properties" window.
Set the DNS server according to the operating
conditions.
Step 8
Click the [OK] button to close
the setting window.
Step 2
[Network and Sharing Center] icon
Step 3
[Change adapter settings] icon
Step 4
[Local Area Connection] icon
Step 5
"Local Area Connection Properties" window
Inputting the IP address, etc.
Step 7
on the personal computer side
6
6-15