Enabling The Snmp Agent Function - HP MSR SERIES Configuration Manual

Task
Configuring an SNMP view
Configuring an SNMP community
Configuring the SNMP trap function
Displaying SNMP packet statistics
Configuring SNMPv3
Task

Enabling the SNMP agent function

Configuring an SNMP view
Configuring an SNMP group
Configuring an SNMP user
Configuring the SNMP trap function
Displaying SNMP packet statistics
Enabling the SNMP agent function
1. Select Advanced > SNMP from the navigation tree to enter the SNMP configuration page, as
shown in Figure 252.
Remarks
Optional.
After creating SNMP views, you can specify an SNMP view for
an SNMP group to limit the MIB objects that can be accessed by
the SNMP group.
Required.
Optional.
Allows you to configure that the agent can send SNMP traps to
the NMS, and configure information about the target host of the
SNMP traps.
By default, an agent is allowed to send SNMP traps to the NMS.
Optional.
Remarks
Required.
The SNMP agent function is disabled by default.
IMPORTANT:
If the SNMP agent function is disabled, all SNMP agent-related
configurations are removed.
Optional.
After creating SNMP views, you can specify an SNMP view for
an SNMP group to limit the MIB objects that can be accessed by
the SNMP group.
Required.
After creating an SNMP group, you can add SNMP users to the
group when creating the users. Therefore, you can realize
centralized management of users in the group through the
management of the group.
Required.
Before creating an SNMP user, you need to create the SNMP
group to which the user belongs.
Optional.
Allows you to configure that the agent can send SNMP traps to
the NMS, and configure information about the target host of the
SNMP traps
By default, an agent is allowed to send SNMP traps to the NMS.
Optional.
252