Configuring Packet Filtering - HP MSR SERIES Configuration Manual

Figure 298 Bandwidth control configuration
Table 135 describes the bandwidth control configuration items.
Table 135 Configuration items
Item
Please select a user
group
CIR
CBS

Configuring packet filtering

Select Advanced > Security > Packet Filter from the navigation tree to enter the Packet Filter page, as
shown in Figure
Description
Set the user group for bandwidth control configuration.
When there are more than one user group, the option all is available. Selecting all
means that the bandwidth control configuration applies to all the user groups.
Set the committed information rate (CIR), that is, the permitted average rate of traffic.
Set the committed burst size (CBS). CBS is the token bucket capacity, that is, the
maximum traffic size that is permitted in each burst.
The CBS value must be greater than the maximum packet size.
IMPORTANT:
By default, the CBS is the number of bytes transmitted in 500 ms at the rate of CIR. If the
number exceeds the value range, the allowed maximum or minimum value is adopted.
299.
287