HP MSR SERIES Configuration Manual page 488

Figure 500 Requesting a certificate
6. Configure an IPsec connection:
a. From the navigation tree, select VPN > IPsec VPN.
b. Click Add.
c. Enter con as the IPsec connection name, select Ethernet0/2 as the gateway interface, enter
3.3.3.1 as the remote gateway IP address, select Certificate as the authentication method,
select CN=router-a for the certificate, select Characteristics of Traffic as the selector type, enter
11.1.1.0/0.0.0.255 as the source IP address/wildcard, and enter 10.1.1.0/0.0.0.255 as the
destination IP address/wildcard.
d. Click Apply.
Figure 501 Configuring an IPsec connection
Configuring Router B
The configuration pages for Router B are similar to those of Router A. (Details not shown)
471