Configure An Immediate Secondary Call On A Service Node - HP MSR SERIES Configuration Manual

a. Type 10 for Node ID.
b. Type play-welcome for Description.
c. Select Enable for Play Voice Prompts; select welcome from the Voice Prompts list.
d. Select Terminate the call for Key#.
e. Click Apply.
For other settings, see
Verifying the configuration
1. Dial 300 at Telephone A.
Router B plays the audio file welcome.wav.
2. Dial #.
The call is terminated.

Configure an immediate secondary call on a service node

Network requirements
As shown in
the following requirements.
After the subscriber dials 300 (the IVR access number) from Telephone A, Telephone B rings.
•
If the subscriber dials a wrong number at Telephone A, Router B plays the audio file
•
input_error.wav.
If no number is dialed at Telephone A within the timeout time, Router B plays the audio file
•
timeout.wav.
Figure 802 Network diagram
Configuration procedure
1. Configure Router A: See
2. Configure Router B:
# Configure a service node.
Select Voice Management > IVR Services > Advanced Settings from the navigation tree, select the
Configure Service Node tab, and click Add to access the following page.
Configuring Router
Figure 802, configure an IVR access number and service node functions on Router B to meet
Configuring Router
B.
A.
775