HP MSR SERIES Configuration Manual page 797

Figure 808 Network diagram
Configuration procedure
Configure Router A: See
1.
2. Configure Router B:
# Configure a local number in the local number configuration page.
The number ID is 500, the number is 500, and the bound line is line 1/0.
# Upload a g729r8 media resource file.
Select Voice Management > IVR Services > Media Resources Management from the navigation
tree to access the following page.
Figure 809 Uploading a g729r8 media resource file
a. Enter 10001 for Media Resource ID.
b. Enter welcome for Rename Media Resource.
c. Click the Browse button of g729r8 codec to select the target file.
d. Click Apply.
Use the same method to upload other g729r8 media resource files timeout, input_error, and bye.
# Configure global error and timeout processing methods to achieve the following purposes:
If no number is dialed at Telephone A within the timeout time, Router B plays audio file
timeout.wav. If number of timeouts reaches 4, Router B terminates the call.
If the subscriber dials a wrong number at Telephone A, Router B plays the audio file
input_error.wav. If the number of input errors reaches 3, Router B terminates the call.
Select Voice Management > IVR Services > Advanced Settings from the navigation tree, and select
the Global Key Policy tab.
Configuring Router A.
780