Configuring The Match Order Of Number Selection Rules - HP MSR SERIES Configuration Manual

After you dial 20001234# at Telephone A, the number immediately matches call route 2000 and
Telephone B is alerted.

Configuring the match order of number selection rules

Network requirements
As shown in
A to Telephone B.
Figure 629 Network diagram
Configuring Router A
1. Add a local number:
Specify the number ID as 1000, the number as 10001234$, and the bound line as 1/0 on the
local number configuration page.
2. Add a call route:
Specify the call route ID as 2000, the destination number as 20001234$, and the destination
address as 1.1.1.2 on the call route configuration page.
3. Configure call route selection priority:
a. Select Voice Management > Call Route from the navigation tree to access the call route list
page.
b. Find the call route with the ID of 2000 in the list, and click its corresponding icon
the advanced setting page.
c. Select 10 from the Call Route Selection Priority list.
d. Click Apply.
Figure 630 Call route selection priority configuration page
Figure 629, configure different number selection rule match orders for calls from Telephone
610
to access