Configuring Sip Local Survival - HP MSR SERIES Configuration Manual

Configuring SIP local survival

Service configuration
Select Voice Management > SIP Local Survival > Service Configuration from the navigation tree to
access the page as shown in
Figure 750 Configuring service
Table 278 Configuration items
Item
Server Running State
IP Address Bound to the
Server
Port Bound to the Server
Registration Aging Time
of the Client
Figure 750.
Description
•
Enable—Enable the local SIP server.
•
Disable—Disable the local SIP server.
By default, the local SIP server is disabled.
Enter the IP address of the local server, which can be a local interface's IP address,
or a loopback address such as 127.0.0.1. The IP address of a local interface is
recommended because a loopback address cannot accept registrations from
remote users.
When the local SIP server is enabled, the IP address of the local server must be
provided.
Enter the port number of the local SIP server.
Enter the maximum registration interval of clients.
729