HP MSR SERIES Configuration Manual page 685

Figure 696 Configuring a call route
Table 261 Configuration items
Item
Call Route ID
Destination Number
Bound Account
Description
SIP Trunk Routing
Description
Enter a call route ID.
Enter the called telephone number.
Select a SIP trunk account to be bound to the voice entity.
Enter a description for the call route.
Use a SIP proxy server to complete calling. If you select this option, you must
Proxy
configure the proxy server beforehand in Voice Management > Call
Server.
Connection > SIP Connection.
Select one of the following transport layer protocols:
•
Transport
•
Layer
Protocol
•
By default, UDP is selected.
•
IP
SIP URL
Routing
•
Scheme
.
By default, the SIP scheme is selected.
Destinati
on
Enter the destination address and port number of the called
Address
party.
Port
Number
Bind to
Server Select a server group. You can create a SIP server group in Voice
server
Group Management > Call Connection > SIP Server Management.
group.
668
UDP.
TCP.
TLS.
SIP—Specify the SIP scheme.
SIPS—Specify the SIPS scheme.