HP MSR SERIES Configuration Manual page 51

ADSL/G.SHDSL interface
Figure 20 Setting ADSL/G.SHDSL parameters
Table 14 Configuration items (in IPoA mode)
Item
WAN Interface
Connect Mode: IPoA
PVC
TCP-MSS
MTU
IP Address
Subnet Mask
Map IP
Table 15 Configuration items (in IPoEoA mode)
Item
WAN Interface
Connect Mode: IPoEoA
PVC
TCP-MSS
MTU
IP Address
Subnet Mask
Table 16 Configuration items (in PPPoA mode)
Item
WAN Interface
Description
Select the ADSL/G.SHDSL interface to be configured.
Select the IPoA connect mode.
Specify the VPI/VCI value for PVC.
Set the maximum TCP segment length of an interface.
Set the MTU of an interface.
Specify the IP address of the ADSL/G.SHDSL interface.
Select a subnet mask for the ADSL/G.SHDSL interface.
Specify the peer destination IP address of the mapped PVC.
Description
Select the ADSL/G.SHDSL interface to be configured.
Select the IPoEoA connect mode.
Specify the VPI/VCI value for PVC.
Set the maximum TCP segment length of an interface.
Set the MTU of an interface.
Specify the IP address of the ADSL/G.SHDSL interface.
Select a subnet mask for the ADSL/G.SHDSL interface.
Description
Select the ADSL/G.SHDSL interface to be configured.
34