HP MSR SERIES Configuration Manual page 182

Figure 164 Network diagram
Configuration procedure
# Configure IP addresses for the interfaces. (Details not shown.)
# Enable the blacklist function.
Select Security Setup > Attack Defend > Blacklist from the navigation tree, and then perform the
•
following configurations, as shown in
Figure 165 Enabling the blacklist function
Select the box before Enable Blacklist.
•
Click Apply.
•
# Add blacklist entries manually.
Click Add and then perform the following configurations, as shown in
•
Figure 166 Adding a blacklist entry for Host D
Figure 165.
165
Figure 166: