Displaying Ipsec Vpn Monitoring Information - HP MSR SERIES Configuration Manual

Hide thumbs Also See for MSR SERIES:

Table of Contents

Retransmission

Displaying IPsec VPN monitoring information

Select VPN > IPsec VPN from the navigation tree.

Click the Monitoring Information tab to enter the page that displays the IPsec connection

configuration and status information.

Select an IPsec connection.

The lower part of the page shows the information of the IPsec tunnel that was set up with the

selected IPsec connection configuration.

To delete all ISAKMP SAs of all IPsec connections, click Delete ISAKMP SA. To delete IPsec tunnels

that use the configuration of an IPsec connection, select the IPsec connection, and click Delete

Selected Connection's Tunnels.

Figure 358 Monitoring information

Table 157 Fields of the IPsec connection list

Connection Status

Enter the interval after which DPD packet retransmission will occur if no DPD response

is received.

Status of an IPsec connection. Possible values include:

Disconnected.

Unconfigured—The IPsec connection is disabled.

Show Quick Links

Table of Contents