Configuring Entity Type Selection Priority Rules - HP MSR SERIES Configuration Manual

4. Select Random Selection from the Third Rule in the Match Order list.
5. Click Apply.
After you dial number 20001234 at Telephone A, the number matches call route 2002.
Configuring the number selection rule as random selection
Configure Router A:
1. Select Voice Management > Dial Plan > Number Match from the navigation tree to access the
page for configuring the match order of number selection rules.
Figure 634 Match order of number selection rules configuration page
2. Select Random Selection from the First Rule in the Match Order list.
3. Click Apply.
After you dial number 20001234 at Telephone A, the number matches call route 2000, 2001, or 2002
at random.

Configuring entity type selection priority rules

Network diagram
As shown in
B. Configure different entity type selection priority rules for calls from Telephone A to Telephone B.
Figure 635 Network diagram
Configuring Router A
1. Select Voice Management > Digital Link Management from the navigation tree to access the digital
link list page.
Figure 635, there are an IP connection and a PRI connection between Router A and Router
613