HP MSR SERIES Configuration Manual page 82

Figure 40 Configuring clear type wireless service
Table 40 Configuration items
Item
Wireless Service
VLAN (Untagged)
Default VLAN
Delete VLAN
SSID HIDE
Configuring advanced settings for clear type wireless service
1. Select Interface Setup > Wireless > Access Service from the navigation tree.
2. Click the icon for the target clear type wireless service.
Description
Display the selected Service Set Identifier (SSID).
Enter the ID of the VLAN whose packets are to be sent untagged.
VLAN (Untagged) indicates that the port sends the traffic of the
VLAN with the VLAN tag removed.
Set the default VLAN of a port.
By default, the default VLAN of all ports is VLAN 1. After you set
the new default VLAN, VLAN 1 is the ID of the VLAN whose
packets are to be sent untagged.
Remove the IDs of the VLANs whose packets are to be sent
untagged and tagged.
•
Enable—Disables the advertisement of the SSID in beacon
frames.
•
Disable—Enables the advertisement of the SSID in beacon
frames.
By default, the SSID in beacon frames is advertised.
IMPORTANT:
•
If the advertising of the SSID in beacon frames is disabled, the
SSID must be configured for the clients to associate with the
device.
•
Disabling the advertising of the SSID in beacon frames does
little good to wireless security. Allowing the advertising of the
SSID in beacon frames enables a client to discover an AP more
easily.
65