Configuring Ssl Vpn Users - HP MSR SERIES Configuration Manual

b. Enter the resource group name res_gr2.
c. Select resources tech and sec_srv on the Available Resources list and click the << button to add
them to the Selected Resources list.
d. Click Apply.
Figure 457 Configuring resource group res_gr2

Configuring SSL VPN users

1. Configure a local user account usera:
a. Select VPN > SSL VPN > User Management > Local User from the navigation tree.
b. Click Add.
The local user configuration page appears, as shown in
c. Enter the username usera, enter the password passworda, confirm the password, select the
box before Enable public account, set the maximum number of users for the public account to
1, and select Permitted as the user status.
d. Click Apply.
Figure
440
458.