HP MSR SERIES Configuration Manual page 66

Figure 31 Configuring an ADSL/G.SHDSL interface
Table 28 Configuration items (IPoA)
Item
WAN Interface
Interface Status
Connect Mode: IPoA
PVC
TCP-MSS
MTU
IP Address
IP Mask
Map IP
Table 29 Configuration items (IPoEoA)
Item
WAN Interface
Description
Displays the name of the ADSL/G.SHDSL interface to be configured.
Display and set the interface status:
•
Connected—Indicating that the current interface is up and connected, click
Disable to shut down the interface.
•
Not connected—Indicating that the current interface is up but not connected,
click Disable to shut down the interface.
•
Administratively Down—Indicating that the current interface is shut down by a
network administrator, click Enable to bring up the interface.
Select IPoA as the connection mode.
Set the VPI/VCI value for the PVC.
Configure the TCP MSS on the interface.
Configure the MTU on the interface.
Configure the IP address for the interface.
Configure the subnet mask for the interface.
Set the remote IP address for the IPoA mapping.
Description
Displays the name of the ADSL/G.SHDSL interface to be configured.
49