Importing Local Users In Bulk - HP MSR SERIES Configuration Manual

Item
Enable public
account
Max Number of
Users
User Status
Expiry Date
MAC Address
Enable MAC
address learning
Selected User
Groups
Available User
Groups

Importing local users in bulk

1. Select VPN > SSL VPN > User Management > Batch Import from the navigation tree.
The batch import page appears.
2. Click Browse to locate the local file that saves the user information.
3. Set whether to directly overwrite the file with the same name on the device.
4. Click Apply to import local users from the file into the SSL VPN.
Description
Select this item to set the local user account as a public account. A public account can
be concurrently used by multiple users to log in to the SSL VPN system.
If you do not select this item, only one user can use the local user account to log in to the
SSL VPN system at a time.
Set the maximum number of concurrent users that can log in to the SSL VPN system by
using the public account.
Select a user status, which can be Permitted, Permitted When Valid, and Denied.
Set the expiry date for the user when the user status is set to Permitted When Valid.
Specify the MAC addresses to be bound with the
username. The MAC addresses are used for user identity
authentication.
Select this item to enable MAC address learning.
With this function enabled, when a user uses this user
account to log in, the SSL VPN system automatically learns
the MAC address of the user host and records the MAC
address for the account. The SSL VPN can record up to
three MAC addresses for an account. The recorded MAC
addresses are still effective after you disable the MAC
address learning function.
Specify the user groups to which the local user belongs.
407
IMPORTANT:
To implement the two
functions, you must also
enable the MAC address
binding function in the
domain policy (see
"Configuring the domain
policy").