Client Mode Configuration Example - HP MSR SERIES Configuration Manual

Client mode configuration example

Network requirements
As shown in
router connects to multiple hosts or printers in the wired network, and thus the wired network is connected
to the wireless network through the router.
The AP accesses the wired LAN, and the router accesses the AP as a client.
•
• The router accesses the wireless service psk by passing the RSN(CCMP)+PSK authentication.
Client with MAC address 0014-6c8a-43ff also accesses the wireless service psk.
•
Figure 96 Network diagram
PSK
Client
PC
Configuration procedure
1. Enable the client mode:
a. Select Interface Setup > Wireless Service > Client Mode from the navigation tree.
b. Click Connect Setup.
Figure 97 Enabling the client mode
Figure 96, the router accesses the wireless network as a client. The Ethernet interface of the
Internet
Gateway
AP
PSK
PSK
Router
Printer Client
Client
105