HP MSR SERIES Configuration Manual page 683

Select Voice Management > SIP Trunk Management > Account Management from the navigation tree,
and click Add. The following page appears.
Figure 695 Configuring a SIP trunk account
Table 260 Configuration items
Item Description
Account ID Enter a SIP trunk account ID.
Select the SIP server group used by the SIP trunk account for registration. SIP server group
can be configured in Voice Management > Call Connection > SIP Server Group
SIP Server Group
Management.
for Registration
By default, a SIP trunk account has no SIP server group specified for registration.
Set the registration aging time. If you do not configure this item, the system uses the
Registration
registration aging time configured in Voice Management > Call Connection > SIP
Aging Time
Connection.
Host Username Enter the host username allocated by the ITSP to the SIP trunk account.
Host Name Enter the host name allocated by the ITSP to the SIP trunk account.
•
•
By default, the SIP trunk account is enabled.
Account Status
Disabling a SIP trunk account that is already involved in a connection does not delete the
connection. In other words, the disable configuration takes effect to the next call that uses
this account.
Enable.
Disable.
666