Setting Wlan Interface Parameters - HP MSR SERIES Configuration Manual

Item
End IP Address
Gateway IP
Address
DNS Server 1
DNS Server 2

Setting WLAN interface parameters

After finishing the previous configuration, click Next.
Figure 26 Setting WLAN parameters
Table 23 Configuration items
Item
WLAN Setting
Description
IMPORTANT:
If the extended address pool is configured on an interface, when a DHCP client's request
arrives at the interface, the server assigns an IP address from this extended address pool
only. The client cannot obtain an IP address if no IP address is available in the extended
address pool.
Specify a gateway IP address in the DHCP address pool for DHCP clients.
When accessing a server or host that is not in its network segment, a DHCP client needs
the gateway to forward data for it. When you specify a gateway IP address in the
address pool, the DHCP server sends an IP address as well as the gateway IP address to
a requesting client.
Specify a DNS server IP address in the DHCP address pool for DHCP clients. Note that
DNS server 1 is used before DNS server 2.
To allow DHCP clients to access the Internet through domain names, the DHCP server
needs to send an IP address as well as a DNS server IP address to clients.
Description
Select whether to make WLAN settings.
40