Enabling The Igmp Snooping Host Tracking Function - HP A8800 Configuration Manual

Step
1. Enter system view.
2. Enter IGMP snooping view.
3. Enable multicast group
replacement.
Enabling multicast group replacement on a port
Step
1. Enter system view.
2. Enter Layer 2 Ethernet
interface view, Layer 2
aggregate interface view, or
port group view.
3. Enable multicast group
replacement.

Enabling the IGMP snooping host tracking function

With the IGMP snooping host tracking function, the router can record the information of the member
hosts that are receiving multicast traffic, including the host IP address, running duration, and timeout time.
You can monitor and manage the member hosts according to the recorded information.
Enabling the IGMP snooping host tracking function globally
Step
1. Enter system view.
2. Enter IGMP snooping view.
3. Enable the IGMP snooping
host tracking function
globally.
Enabling the IGMP snooping host tracking function in a VLAN
Step
1. Enter system view.
2. Enter VLAN view.
3. Enable the IGMP snooping
host tracking function in the
VLAN.
Command
system-view
igmp-snooping
overflow-replace [ vlan vlan-list ]
Command
system-view
•
Enter Layer 2 Ethernet interface
view or Layer 2 aggregate
interface view:
interface interface-type
interface-number
•
Enter port group view:
port-group manual
port-group-name
igmp-snooping overflow-replace
[ vlan vlan-list ]
Command
system-view
igmp-snooping
host-tracking
Command
system-view
vlan vlan-id
igmp-snooping host-tracking
32
Remarks
N/A
N/A
Disabled by default.
Remarks
N/A
Use either command.
Disabled by default.
Remarks
N/A
N/A
Disabled by default.
Remarks
N/A
N/A
Disabled by default.