Item
Password
New Password
TCP-MSS
MTU
Configuring a CT1/PRI interface
The CT1/PRI interface supports PPP connection mode. For more information about PPP, see
an SA
interface."
When it is operating as a CT1 interface, all the timeslots (numbered 1 to 24) can be randomly divided
into groups. Each of these groups can form one channel set for which the system automatically creates an
interface logically equivalent to a synchronous serial interface. This interface supports link layer protocols
such as PPP, HDLC, FR, LAPB, and X.25, and network protocols such as IP and IPX.
To configure a CT1/PRI interface:
1.
Select Interface Setup > WAN Interface Setup from the navigation tree.
2.
Click the
3.
Configure the CT1/PRI interface, as described in
Figure 34 Configuring a CT1/PRI interface
Description
Displays whether a password is configured for authentication.
If the field displays null, no password is configured for authentication.
Set or modify the password for authentication.
Configure the TCP MSS on the interface.
Configure the MTU on the interface.
icon for the CT1/PRI interface.
Table
34.
54
"Configuring