Displaying Statistics - HP MSR SERIES Configuration Manual

Table 58 Configuration items
Item
AuthMode
CipherSuite
Password
KeyID
Method 2
2.
You can also enter a wireless service to specify the wireless service to be connected on the page
displayed after clicking the Connect icon of the wireless service.
Figure 94 Associating the specified wireless service
Enter the specified wireless service in the Wireless Service Name field, and click Connect. Then the
dialog box in
wireless service type.

Displaying statistics

Select Interface Setup > Wireless Service > Client Mode from the navigation tree and click Statistic
Information.
Figure 95 Displaying statistics
Figure 93 appears. Set the options on the dialog box according to the specified
Description
Specify the network authentication mode, which can be:
•
Open System—Open system authentication, namely, no
authentication
•
Shared Key—Shared key authentication, which requires the
client and the device to be configured with the same shared
key.
•
RSN+PSK—PSK authentication
Set the data encryption mode, which can be:
•
Clear—No encryption
•
WEP—WEP encryption
•
TKIP/CCMP—TKIP/CCMP encryption
Configure the WEP key
There are four static keys in WEP. Their key indexes are 1, 2, 3,
and 4. The key corresponding to the specified key index will be
used for encrypting and decrypting frames.
104