Configuring Access Control - HP MSR SERIES Configuration Manual

Figure 295 User configuration
Table 132 describes the user configuration items.
Table 132 Configuration items
Item
Please select a user group
Add Mode
Username
IP Address

Configuring access control

Select Advanced > Security > Connect Control from the navigation tree to enter the configuration page,
as shown in
Description
Select the group to which you want to add users.
Set the mode in which the users are added.
•
Static—In this mode, type the username and IP address manually in the
following fields.
•
Dynamic—The system displays all devices connected to the device for you to
select.
Set the username.
•
In static add mode, specify the username manually.
•
In dynamic add mode, the system automatically generates a username.
Set the IP address.
•
In static add mode, specify the IP address manually.
•
In dynamic add mode, the system automatically obtains the IP addresses and
MAC addresses of devices connected to the device for you to select.
Figure 296.
284