Vlan Transparency; Configuring Bridging; Recommended Basic Bridging Configuration Procedure; Enabling A Bridge Set - HP MSR SERIES Configuration Manual

Figure 287 The proper MAC-to-interface mapping is not found in the bridge table
When a bridge receives a broadcast or multicast frame, it forwards the frame to all interfaces other than
the receiving interface.

VLAN transparency

VLAN transparency enables a bridge to forward VLAN-tagged packets without processing their VLAN
tags. If your device does not support VLAN tags, enable VLAN transparency on any interfaces that might
receive VLAN-tagged packets to avoid dropping of VLAN tags.

Configuring bridging

Recommended basic bridging configuration procedure

Step
1.

Enabling a bridge set

2. Adding an interface to a
bridge set
Enabling a bridge set
Select Advanced > Bridge from the navigation tree to enter the Global config page.
Remarks
Required.
No bridge set is enabled by default.
Required.
An interface is not in any bridge set by default.
276