Sms Sending-Enable; Snmp-Agent Trap Enable Sms - HP MSR series Command Reference Manual

Hello world!%

sms sending-enable

Use sms sending-enable to enable SMS on a cellular interface.
Use undo sms sending-enable to restore the default.
Syntax
sms sending-enable
undo sms sending-enable
Default
The device cannot send any short messages except configuration deployment responses and forwarded
short messages.
Views
Cellular interface view, cellular Ethernet interface view
Default command level
2: System level
Usage guidelines
This command is not available for the USB 3G modem and the SIC-4G-LTE module.
Examples
# Disable the device to send any short messages except configuration deployment responses and
forwarded short messages on Cellular 0/0.
<Sysname> system-view
[Sysname] interface Cellular 0/0
[Sysname-Cellular0/0] undo sms sending-enable

snmp-agent trap enable sms

Use snmp-agent trap enable sms to enable the device to send the content of incoming short messages in
SNMP traps.
Use undo snmp-agent trap enable sms to disable the device to send the content of incoming short
messages in SNMP traps.
Syntax
snmp-agent trap enable sms
undo snmp-agent trap enable sms
Default
The device can send the content of incoming short messages in SNMP traps.
Views
System view
Default command level
2: System level
117