HP MSR SERIES Configuration Manual page 828

Item
Call Waiting
Hunt Group
Feature Service
Message Waiting
Indicator
Processing Priority
When the Line is
Busy
Select the Number(s)
Advanced settings
Select Voice Management > Advanced Configuration > Batch Configuration from the navigation tree,
and then click the Advanced Settings link in the Local Number area to access the local number advanced
settings page, as shown in
Description
Configure call waiting:
•
Enable.
•
Disable.
By default, call waiting is disabled.
After call waiting is enabled, configure the following parameters as needed:
•
Number of Call Waiting Tone Play Times.
•
Number of Tones Played at One Time.
•
Interval for Playing Call Waiting Tones.
By default, two call waiting tones are played once, and if the value of Number of Tones
in a Call Waiting Tone is greater than 1, the Interval for Playing Call Waiting Tones is
15 seconds.
Configure hunt group:
•
Enable.
•
Disable.
By default, hunt group is disabled.
Configure Feature service:
•
Enable.
•
Disable.
By default, Feature service is disabled.
Configure MWI:
•
Enable.
•
Disable.
By default, MWI is disabled.
IMPORTANT:
Generally, the voice gateway sends a SUBSCRIBE to the server, and receives a NOTIFY
from the server if the subscription is successful, and gets the status of the voice mailbox
afterwards.
Specify the processing sequence of services when the line is busy.
Select the boxes of desired local numbers, and then click the Apply to Selected
Number(s) button to apply the above call services settings to the selected local numbers.
Figure 848.
811