HP MSR SERIES Configuration Manual page 337

Hide thumbs Also See for MSR SERIES:

Table of Contents

Click Apply to submit the settings.

Configure Router D:

# Create an MST region named example, map VLAN 10, VLAN 30, and VLAN 40 to MSTI 1,

MSTI 3, and MSTI 4, respectively, and configure the revision level of the MST region as 0.

Configure the MST region in the same way the MST region is configured on Router A.

# Enable MSTP globally:

From the navigation tree, select Advanced > MSTP > Global.

On the page that appears, select Enable from the Enable STP Globally list.

Select MSTP from the Mode list.

Click Apply to submit the settings.

Verifying the configurations

You can use the display stp brief command to display brief spanning tree information on each device

after the network converges.

# Display brief spanning tree information on Router A.

[RouterA] display stp brief

# Display brief spanning tree information on Router B.

[RouterB] display stp brief

# Display brief spanning tree information on Router C.

[RouterC] display stp brief

# Display brief spanning tree information on Router D.

[RouterD] display stp brief

Show Quick Links

Table of Contents