Configuring Ip Addresses Excluded From Dynamic Allocation - HP MSR SERIES Configuration Manual

Item
Subnet Mask
Lease Duration
Domain Name
Gateway IP Address
Primary DNS Server
Standby DNS Server
Configuring IP addresses excluded from dynamic
allocation
1. Select Advanced > DHCP Setup from the navigation tree.
Click the DHCP Interface Setup tab to enter the DHCP interface setup configuration page as shown
2.
in Figure
3. Select the Server option in the Type field.
4. Expand the Forbidden IP Addresses node.
Description
IMPORTANT:
Make sure the IP address is on the same network segment as the IP address of
the DHCP server interface or the DHCP relay agent interface to avoid wrong IP
address allocation.
Specify the lease for IP addresses to be assigned.
NOTE:
•
If the lease has an end time specified later than the year 2106, the system
considers it an expired lease.
•
The lease duration does not have the inherit attribute.
Specify a domain name suffix for the DHCP client.
After specifying a domain name in the address pool, the DHCP server assigns
the domain name along with an IP address to a client.
Specify a gateway for the DHCP client.
DHCP clients that want to access hosts outside the local subnet need a
gateway to forward data. After specifying a gateway in the address pool, the
DHCP server assigns the gateway address along with an IP address to a
client.
Specify a primary DNS server for the DHCP client.
In order for clients to access the Internet using a domain name, the DHCP
server assigns the specified DNS server address along with an IP address to
a client.
Specify a standby DNS server for the DHCP client.
213.
210