Configuring Dhcp Interface Setup - HP MSR SERIES Configuration Manual

Figure 212 DHCP Enable
Table 104 Configuration items
Item
DHCP

Configuring DHCP interface setup

1. Select Advanced > DHCP Setup from the navigation tree.
2. Click the DHCP Interface Setup tab.
The DHCP interface setup configuration page appears, as shown in
Figure 213 DHCP interface setup
3. Configure the DHCP interface setup as described in
4. Click Apply.
Table 105 Configuration items
Item
Interface
Type
Description
Enable or disable DHCP globally.
Description
Select an interface to be configured.
Select a type for the interface, which can be:
•
None—Upon receiving a DHCP request, the interface does not assign an IP
address to the requesting client nor serves as a DHCP relay agent to forward
the request.
•
Server—Upon receiving a DHCP request, the interface assigns the
requesting client an IP address from the address pool.
•
Relay—Upon receiving a DHCP request, the interface forwards the request
to an external DHCP server, which assigns an IP address for the requesting
client.
•
Client—The interface uses DHCP to obtain an IP address.
205
Figure
Table 105.
213.