HP MSR SERIES Configuration Manual page 694

Hide thumbs Also See for MSR SERIES:

Table of Contents

Figure 706 Configuring a call route for the SIP trunk account

Enter 20000 for Call Route ID.

Enter 1000 for Destination Number.

Select account1 from the Bound Account list.

Select Bind to Server Group for SIP Trunk Routing.

Select server-group-1 from the Server Group list.

Click Apply.

# Configure the call route for the inbound calls from public network user 1000 to private network user

2000. Configure the IP address of the peer end as 1.1.1.1, which is the address of the interface on Router

Select Voice Management > Call Route from the navigation tree and click Add.

Figure 707 Configuring a call route

Enter 2 for Call Route ID.

Show Quick Links

Table of Contents