Setting Buffer Capacity And Refresh Interval - HP MSR SERIES Configuration Manual

Figure 527 Loghost configuration page
3. Configure the log host as described in
4. Click Apply.
Table 203 Configuration items
Item
IPv4/Domain
Loghost IP/Domain
IPv6
Loghost IP

Setting buffer capacity and refresh interval

1. Select Other > Syslog from the navigation tree.
2. Click the Log Setup tab.
The syslog configuration page appears, as shown in
Table
Description
Set the IPv4 address or domain name of the log host.
Set the IPv6 address of the log host.
502
203.
Figure 528.