Configuration Procedure - HP MSR SERIES Configuration Manual

Configuration procedure

To configure a CE1/PRI interface:
1. Select Interface Setup > WAN Interface Setup from the navigation tree.
2. Click the
3. Configure the CE1/PRI interface, as described in
and "Configuring a CE1/PRI interface in CE1
Configuring a CE1/PRI interface in E1 mode
Figure 32 Configuring a CE1/PRI interface in E1 mode
Table 32 Configuration items (in E1 mode)
Item
WAN Interface
Interface Status
Work Mode: E1
User Name
Password
New Password
TCP-MSS
icon for the CE1/PRI interface.
Description
Displays the name of the CE1/PRI interface to be configured.
Display and set the interface status:
•
Connected—Indicating that the current interface is up and connected, click
Disable to shut down the interface.
•
Not connected—Indicating that the current interface is up but not connected,
click Disable to shut down the interface.
•
Administratively Down—Indicating that the current interface is shut down by a
network administrator, click Enable to bring up the interface.
Select E1 as the operating mode.
Configure the username for authentication.
Displays whether a password is configured for authentication.
If the field displays null, no password is configured for authentication.
Set or modify the password for authentication.
Configure the TCP MSS on the interface.
"Configuring a CE1/PRI interface in E1
mode."
52
mode"