HP MSR SERIES Configuration Manual page 398

a. Click the
in Figure 384.
b. Select Manual for Connect Mode.
c. Enter IP address 2.2.2.2.
d. Select IP mask 24 (255.255.255.0).
e. Click Confirm.
Figure 384 Configuring interface Ethernet 0/1
3. Create a GRE tunnel:
a. Select VPN > GRE from the navigation tree.
Click Add and then perform the configurations shown in
b.
c. Enter 0 in the Tunnel Interface field.
d. Enter IP address/mask 10.1.2.2/24.
e. Enter the source end IP address 2.2.2.2, the IP address of Ethernet 0/1.
f. Enter the destination end IP address 1.1.1.1, the IP address Ethernet 0/1 on Router A.
g. Click Apply.
icon for interface Ethernet 0/1 and then perform the configurations shown
381
Figure 385.