HP MSR SERIES Configuration Manual page 678

2. Click Add.
The page for configuring a server group appears.
Figure 689 Configuring server information management
3. Configure server information management as described in
4. Click Apply.
Table 258 Configuration items
Item
Server ID
Transport Layer Protocol
URL Scheme
Server Address
Port Number
Description
Set server ID. A SIP server group can be configured with up to five member servers.
A server ID represents the priority of the server in the SIP server group. The smaller
the ID, the higher the priority.
•
UDP—Specify UDP as the transport layer protocol for the connections between
the SIP trunk device and the SIP server.
•
TCP—Specify TCP as the transport layer protocol for the connections between
the SIP trunk device and the SIP server.
•
TLS—Specify TLS as the transport layer protocol for the connections between the
SIP trunk device and the SIP server.
By default, the UDP protocol is adopted.
•
SIP—Specify the SIP scheme as the URL scheme.
•
SIPS—Specify the SIPS scheme as the URL scheme.
By default, the SIP URL scheme is adopted.
Specify the IPv4 address or domain name of the SIP server.
Specify the port number of the SIP server.
661
Table 258.