Figure 289 Configuring interface
Table 129 Configuration items
Item
Interface
Bridge Group
VLAN Transmit
Bridging configuration example
Network requirements
As shown in
Enable VLAN transparency on Ethernet interfaces of the two routers, so the two office areas can
communicate within the same VLAN.
Remarks
Select the interface you want to configure.
Set the ID of the bridge set to which you want add the interface.
Enable or disable VLAN transparency on the interface.
HP recommends not enabling this function on a subinterface.
A VLAN interface does not support this function.
Figure
290, the trunk ports of Switch A and of Switch B are assigned to the same VLAN.
278