Verifying The Configuration - HP MSR SERIES Configuration Manual

Figure 463 Configuring RADIUS scheme named system
3. Enable RADIUS authentication for the SSL VPN domain:
a. Select VPN > SSL VPN > Domain Management > Authentication Policy from the navigation
tree.
b. Click the RADIUS Authentication tab.
c. Select the box before Enable RADIUS authentication.
d. Click Apply.
Figure 464 Enable RADIUS authentication

Verifying the configuration

Launch a browser on a host, and enter https://10.1.1.1/svpn/ in the address bar to enter the SSL VPN
login page. You can see that RADIUS authentication is the default authentication method and a
verification code is needed for login.
445