HP MSR SERIES Configuration Manual page 385

Figure 365 Adding an ISP domain
Table 160 Configuration items
Item
ISP Domain
Primary
Authentication
Methods
Backup
Primary
Authorization
Methods
Backup
Description
Specify the name of the ISP domain.
Select the primary authentication method for PPP users.
•
HWTACACS—HWTACACS authentication, which uses the HWTACACS
scheme system.
•
Local—Local authentication.
•
None—No authentication. All users are trusted and no authentication is
performed.
•
RADIUS—RADIUS authentication, which uses the RADIUS scheme system.
•
If you do not select any authentication method, the default authentication
method of the ISP domain will be used. The default is local authentication.
Specify whether to use local authentication as the backup authentication
method. This item is available only when you select HWTACACS or RADIUS
as the primary authentication method.
Select the primary authorization method for PPP users.
•
HWTACACS—HWTACACS authorization, which uses the HWTACACS
scheme system.
•
Local—Local authorization.
•
None—No authorization. The access device does not perform
authorization for PPP users. After passing authentication, PPP users can
directly access the network.
•
RADIUS—RADIUS authorization, which uses the RADIUS scheme system.
•
If you do not select any authorization method, the default authorization
method of the ISP domain will be used. The default is local authorization.
Specify whether to use local authorization as the backup authorization
method. This item is available only when you select HWTACACS or RADIUS
as the primary authorization method.
368