Configuring An Snmp View - HP MSR SERIES Configuration Manual

Item
Local Engine ID
Maximum Packet
Size
Contact
Location
SNMP Version

Configuring an SNMP view

Select Advanced > SNMP from the navigation tree, and then click the View tab to enter the page as
shown in Figure
Figure 253 View page
Creating an SNMP view
Click Add, and the Add View window appears as shown in
Apply, and then you enter the page as shown in
Figure 254 Creating an SNMP view (1)
Description
Configure the local engine ID.
The validity of a user after it is created depends on the engine ID of the SNMP
agent. If the engine ID when the user is created is not identical to the current engine
ID, the user is invalid.
Configure the maximum size of an SNMP packet that the agent can receive or
send.
Set a character string to describe the contact information for system maintenance.
If the device is faulty, the maintainer can contact the manufacture factory
according to contact information for the device.
Set a character string to describe the physical location of the device.
Set the SNMP version run by the system.
253.
Figure
Figure 255.
254
254. Type the view name and click