Nat Configuration Examples; Internal Hosts Accessing Public Network Configuration Example - HP MSR SERIES Configuration Manual

Figure 145 Configuring connection limit
3. Configure the parameters as described in
Click Apply.
4.
Table 89 Configuration items
Item
Enable connection limit
Max Connections

NAT configuration examples

Internal hosts accessing public network configuration example

Network requirements
As shown in
202.38.1.2/24, and internal network address is 10.1 10.0.0/16. Specifically, the company has the
following requirements:
The internal users can access the Internet by using public addresses 202.38.1.2 and 202.38.1.3.
•
Configure the upper limit of connections as 1000 based on the source IP address.
•
Figure 146 Network diagram
Description
Enable or disable connection limit.
Set the maximum number of connections that can be initiated from a source IP
address.
Figure 146, a company has three public IP addresses in the range of 202.38.1.1/24 to
Table 89.
146