Area Prefix - HP MSR SERIES Configuration Manual

Hide thumbs Also See for MSR SERIES:
Table of Contents

Advertisement

Figure 753 Configuring a call-out route
Table 281 Configuration items
Item
ID
Destination Number
Prefix
Number length
Destination IP address
Port Number

Area Prefix

Area prefix
When the local SIP server is connected to the extranet, external users can originate calls to internal users
registered with the local SIP server. For calls from external users to internal users, the local SIP server
removes the configured area prefix from each called number to converts it to an internal short number.
For example, if an external user dials number 01050009999, the local SIP server checks whether any
area prefix matches the called number. If the area prefix 0105000 is available, the local SIP server
removes the prefix 0105000 from the called number and sends the call to 9999.
Select Voice Management > SIP Local Survival > Area Prefix from the navigation tree to access the page
as shown in
Figure 754 Configuring a call-in number prefix
Enter the call-in number prefix, and click Add a Prefix.
Description
Enter the ID of the call-out route.
Enter the destination number prefix and length. Suppose the destination number
prefix is 4100, and the number length is 6. This configuration matches destination
numbers that are 6-digit long and start with 4100.
A dot can be used after a number to represent a character. This configuration does
not support other characters.
Enter the destination IP address and port number.
Enter the area prefix added before the calling numbers of outgoing calls.
Figure
754.
732

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents