Configuring Other Voice Functions - HP MSR SERIES Configuration Manual

Configuring other voice functions

Select Voice Management > Local Number from the navigation tree, and then click the
local number to be configured to access the call services configuration page as shown in
Figure 585 Call services configuration page
Table 214 Configuration items
Item
Calling Name
Calling Information
Delivery
Call Identity
Delivery
Description
Set the calling name, a string of case-sensitive characters including numbers 0 through 9,
letters A through Z or a through z, underlines (_), hyphens (-),dots (.), exclamation point
(!), percent sign (%), asterisk (*), plus sign (+), grave accent (`), single quotation mark ('),
and tilde (~).
By default, no calling name is configured.
The calling name in the calling identity information can only be transmitted in MDMF
format. Therefore, if the calling information delivery is enabled, you must select the
Complex Delivery option in the Calling Information Delivery area.
Configure the format of calling information:
•
Complex Delivery—Calling identity information is transmitted in complex format.
•
Simple Delivery—Calling identity information is transmitted in simple format.
•
Do Not Delivery—Do not deliver the Calling identity information.
By default, the complex delivery is adopted.
If the remote end supports one format only, you must use the same message format at the
local end.
•
Enable.
•
Disable.
The calling identity is delivered by default.
564
icon of the
Figure 585.