Qos Configuration Examples; Subnet Limit Configuration Example - HP MSR SERIES Configuration Manual

QoS configuration examples

Subnet limit configuration example

Network requirements
As shown in
Perform per-IP rate limiting for traffic sourced from Host A through Host Z, which are on the network
segments 2.1.1.1 through 2.1.1.100, with the per-IP limit being 5 kbps.
Figure 244 Network diagram
Configuration procedure
# Configure the bandwidth limit settings for the network segment.
Select Advance > QoS Setup > Subnet Limit from the navigation tree, and click Add on the
1.
displayed page.
Figure 245 Configuring subnet limit
2. Enter 2.1.1.1 in the Start Address field.
Figure 244, limit the rate of packets leaving Ethernet 1/1 of Router.
244