Configuring Direct Calling For Sip Uas Through The Sip Protocol (Configuring Domain Name) - HP MSR SERIES Configuration Manual

Select Voice Management > States and Statistics > Call Statistics from the navigation tree to access
•
the Active Call Summary page, which displays the statistics of ongoing calls.
Configuring direct calling for SIP UAs through the SIP protocol
(configuring domain name)
Network requirements
As shown in
through a DNS server and then make calls using the SIP protocol.
Figure 564 Network diagram
IMPORTANT:
Before the following configurations, you need to configure domain name resolution. For more information
about DNS, see "Configuring DNS."
Configuring Router A
# Create a local number.
Select Voice Management > Local Number from the navigation tree, and then click Add to access the
page for creating a local number.
Figure 564, acting as SIP UAs, Router A and Router B can first query destination addresses
536