Creating A Static Arp Entry - HP MSR SERIES Configuration Manual

Creating a static ARP entry

1. From the navigation tree, select Advanced > ARP Management > ARP Table.
The ARP table management page appears, as shown in
2. Click Add.
The New Static ARP Entry page appears.
Figure 341 Adding a static ARP entry
3. Configure the parameters as described in
4. Click Apply.
Table 151 Configuration items
Item
IP Address
MAC Address
Advanced
Options
Removing ARP entries
From the navigation tree, select Advanced > ARP Management > ARP Table.
The ARP table management page appears, as shown in
To remove specific ARP entries, select the boxes in front of them, and click Del Selected.
•
• To remove all static and dynamic ARP entries, click Delete Static and Dynamic.
To remove all static ARP entries, click Delete Static.
•
• To remove all dynamic ARP entries, click Delete Dynamic.
Description
Enter an IP address for the static ARP entry.
Enter a MAC address for the static ARP entry.
Enter a VLAN ID and specify a port for the static ARP entry.
VLAN ID
IMPORTANT:
The VLAN ID must be the ID of the VLAN that has already been created, and the port
must belong to the VLAN. The corresponding VLAN interface must have been
Port
created.
VPN
Enter the name of the VPN instance to which the static ARP entry belongs.
Instance
Figure
Table 151.
Figure 340.
339
340.