Validating The Basic Services Configuration - HP MSR SERIES Configuration Manual

Item
Network Name
(SSID)
Network Hide
Radio Unit
Enable Encrypt
Encrypt Act
Key Mode
Key Seed
Key 1
Key 2
Key 3
Key 4

Validating the basic services configuration

After finishing basic services configuration, click Next to validate your configuration.
This page shows the configurations that you have made through the previous steps. Check the
configurations, and click Finish to validate them. To make any modification, click Back to go to previous
pages and edit the settings.
The page also provides an option Save Current Configuration for you to save the configurations to the
configuration file (both the .cfg file and the .xml file) to be used at the next startup of the device. If you
select this option, the configurations you make survive a device reboot.
Description
Specify a wireless network name.
Select whether to hide the network name.
Select a radio unit supported by the AP, which can be 1 or 2.
Which value is supported varies with device models.
Select whether to enable data encryption.
With data encryption enabled, data transmission between wireless client and wireless
device can be secured.
Select an encryption mode for the wireless network, WEP40 or WEP104.
Select a key format.
•
When you select WEP40, the key can be a 5-character string or 10-digit hexadecimal
number.
•
When you select WEP104, the key can be a 13-character string or a 26-digit
hexadecimal number.
You can either use a key seed to generate keys or enter keys manually. Then, you can
choose one of the configured keys.
•
When you select WEP40 and ASCII, the generated or entered key is a 5-character
string.
•
When you select WEP40 and HEX, the generated or entered key is a 10-digit
hexadecimal number.
•
When you select WEP104 and ASCII, the generated or entered key is a 13-character
string.
•
When you select WEP104 and HEX, the generated or entered key is a 26-digit
hexadecimal number.
41