Ping Operation - HP MSR SERIES Configuration Manual

To perform a traceroute operation:
1. Log in to the Web interface, and select Other > Diagnostic Tools from the navigation tree to enter
the traceroute operation page, as shown in
2. Enter the destination IP address or host name.
3. Click Start.
You can see the result in the Summary box.
Figure 529 Traceroute configuration page

Ping operation

The Web interface does not support IPv6 ping.
To perform a ping operation:
1. Select Other > Diagnostic Tools from the navigation tree.
2. Click the Ping tab, as shown in 3.
3. Enter the destination IP address or host name.
4. Click Start.
You can see the result in the Summary box.
Figure 529.
505