Configuring Silent Monitor And Barge In - HP MSR SERIES Configuration Manual

Figure 598 Configuring call hold
b. Select Enable for Call Hold.
Select Enable for Three-Party Conference.
c.
d. Click Apply.
Verifying the configuration
Now Telephone B, as the conference initiator, can establish a three-party conference with participants
Telephone A and Telephone C.
If you also enable three-party conference on the FXS lines of Telephone A and Telephone C on Router A
and Router C, then during the conference, a new call can be initiated from Telephone A or Telephone C
to invite another passive participant. In this way, you can implement conference chaining.

Configuring silent monitor and barge in

Network requirements
Configure silent monitor for Telephone C to monitor the conversation between Telephone A and
•
Telephone B. After configuration, when Telephone A and Telephone B is in a conversation, dialing
the feature code *425*Number of Telephone A# at Telephone C can monitor the conversation
between Telephone A and Telephone B.
• Configure barge in for Telephone C to participate the conversation between Telephone A and
Telephone B. After configuration, dialing the feature code *428# at Telephone C can participate
the conversation between Telephone A and Telephone B.
576