HP MSR SERIES Configuration Manual page 185

Figure 170 Enabling the blacklist function
Select the box before Enable Blacklist.
•
Click Apply.
•
# Add blacklist entries manually.
Click Add and then perform the following configurations, as shown in
•
Figure 171 Adding a blacklist entry for Host D
• Enter IP address 5.5.5.5, the IP address of Host D.
Select Permanence for this blacklist entry.
•
Click Apply.
•
• Click Add and then perform the following configurations, as shown in
Figure 172 Adding a blacklist entry for Host C
168
Figure 171:
Figure 172: